Reviews - www.ztwo.com

Customer Reviews (1027)

US$ 1.76
~
US$ 2.20

2022-03-28

Reviews (158)

J****y

Le quedaron súper bien
US$ 2.24
~
US$ 2.80

2022-03-26

Reviews (227)

S****S

Great tool to have around the house if you ever repair your appliances or garden equipment - especially when you are trying to remove bolt or nut on a shaft with a flywheel. I used the screwdriver method and failed miserably, and I ended up buying this. I was very skeptical at first, but it worked like a charm.
US$ 1.76
~
US$ 2.20

2022-03-23

Reviews (158)

Ch****es

You see these multi-colored ones on dirt bikes, which gives them a really flashy look, but if you're looking for something more subtle, go with black. I went with black on my street bike. They look sharp, yet subtle. Also, these are made of plastic, so these are very light and do not affect the wheel balance.
US$ 1.76
~
US$ 2.20

2022-03-23

Reviews (158)

Ch****es

You see these multi-colored ones on dirt bikes, which gives them a really flashy look, but if you're looking for something more subtle, go with black. I went with black on my street bike. They look sharp, yet subtle.
US$ 2.24
~
US$ 2.80

2022-03-20

Reviews (227)

Ri****ix

Good value. Works well on a few test runs but haven't used it on what i intended it for as of yet
US$ 20.72
~
US$ 25.90

2022-03-08

Reviews (33)

Am****er

👍
US$ 11.92
~
US$ 14.90

2022-03-07

Reviews (26)

C****s

I knew this needed a 130 jet from other reviews for my predator 212cc engine. So I ordered some jets. I put the 130 in and this carb fired the engine up first pull. Did some tuning with the carb and it runs amazing without any issues. Working on a throttle cable end to use on this but even without any throttle she purrs with this carb.
US$ 2.24
~
US$ 2.80

2022-03-07

Reviews (227)

Ta****er

Great tool
US$ 13.20
~
US$ 16.50

2022-03-06

Reviews (84)

C****2

Works fine, not to bad to install
US$ 20.72
~
US$ 25.90

2022-03-04

Reviews (33)

G****.

They needed to be shaved down to fit our bike but thankfully my husband works somewhere that time his was easily done.. they look and feel great now that they are installed
US$ 6.32
~
US$ 7.90

2022-03-03

Reviews (17)

J****y

Love the way they look and feel. They fit perfect and are comfortable. Surprisingly they havent been scratched yet. Pretty nice grips
US$ 1.76
~
US$ 2.20

2022-02-28

Reviews (158)

Br****ty

These were a pain to put on, but totally worth it!! I love that I could make my bike have personality!!
US$ 1.76
~
US$ 2.20

2022-02-27

Reviews (158)

D****d

Good
US$ 2.24
~
US$ 2.80

2022-02-22

Reviews (227)

E****n

I needed to remove the fan clutch assembly from a 2012 Ram 1500. Chrysler products have the fan clutch screwed onto the threaded end of the water pump shaft with one large (36mm, I think) nut. You need a way to hold the water pump pulley so it doesn't spin to break the fan clutch free. There are 5/16ths inch holes drilled in the pulley face at the 3, 6, 9, and 12 o'clock positions.Using the small pins on this spanner, adjust it so the pins fit in the holes at the 3 and 9 o'clock positions. I used a 15 inch Crescent wrench on the fan clutch nut. Held the spanner in place with one hand and tapped the Crescent wrench with a 3 pound hammer. Two taps and it was free. Nice.So much better than trying to rig a homemade tool. I won't use it very often (I hope) but it's nice to have when I need it.
US$ 2.24
~
US$ 2.80

2022-02-22

Reviews (227)

E****n

I needed to remove the fan clutch assembly from a 2012 Ram 1500. Chrysler products have the fan clutch screwed onto the threaded end of the water pump shaft with one large (36mm, I think) nut. You need a way to hold the water pump pulley so it doesn't spin to break the fan clutch free. There are 5/6ths inch holes drilled in the pulley face at the 3, 6, 9, and 12 o'clock positions.Using the small pins on this spanner, adjust it so the pins fit in the holes at the 3 and 9 o'clock positions. I used a 15 inch Crescent wrench on the fan clutch nut. Held the spanner in place with one hand and tapped the Crescent wrench with a 3 pound hammer. Two taps and it was free. Nice.So much better than trying to rig a homemade tool. I won't use it very often (I hope) but it's nice to have when I need it.
US$ 2.24
~
US$ 2.80

2022-02-19

Reviews (227)

D****G

rotor holding tool has two sided use !!
US$ 2.24
~
US$ 2.80

2022-02-19

Reviews (227)

da****up

rotor holding tool has two sided use !!
US$ 7.12
~
US$ 8.90

2022-02-18

Reviews (46)

J****n

Worked for a short time.
US$ 1.76
~
US$ 2.20

2022-02-18

Reviews (158)

Me****sa

Let me start by saying I alsot didn't purchase these due to reading all the negative reviews, but I went ahead and took a chance for $10 bucks what the heck. Glad I did, I have absolutely ZERO complaints about these. They arrived exactly as described, (72 covers) and color was as shown on the listing. They come long and u need to cut them to length of your spokes. The whole process couldn't have been any easier, took maybe 45 mins to install them on my Dirt Bike wheels from start to finish and that's with me taking my sweet time lol. They easily cut with a standard pair of scissors ✂️ then simply slide right onto each spoke. Once installed they fit snug and don't move easily, and really adds a nice touch to your wheels and overall look of your bike and for only $10 bucks, can't go wrong. I'm very happy with them.
US$ 1.76
~
US$ 2.20

2022-02-18

Reviews (158)

ty****ee

Took an hour or so to install but they look great

1 2 3 4 ... 51 52

All Categories

Chain Drive System

Motorcycle Repair Tools

Go Kart Parts

Oil Filter & Tank Switch

Dirt Bike Parts

Self Balancing Scooter

Monkey Parts

2 Stroke Bicycle Parts

Polaris Parts

ATV Parts

Wheels System Parts

Frame & Drive System

Engines & Engine Parts

Electrical Parts

Carb & Air Filters

Brake & Clutch System

Handlebar Systeam

GY6 Mopeds Team

Pocket Parts

Company Info

User Center

Customer Reviews (1027)